34.
LED Status indicator
Mount the LED status indicator in the interior of the car at a visible place. Car owner can learn the current
setting status of main unit. Refer to the table below.
LED indication while ignition is “OFF”
Setting modes in standby
Pattern of LED blinking
Upon success of remote engine start
LED solid on
Normal mode
* * * * * * * * * *
Programmed daily start-time in standby mode
** ** ** ** ** ** ** **
Temperature-controlled start in standby mode
*** *** *** *** *** ***
Temperature-controlled & daily start-time in standby mode
**** **** **** **** ****
Valet mode “ON”
***** ***** ***** ***** ***** *****
35. Code learning of remote transmitters
Follow the steps as below.
(1)
Turn the ignition “ON” (Engine must not be running)
Press and hold override switch for about 6 sec and release after the siren chirps 4 times when the main
system has entered learning mode.
(2)
Press and hold remote transmitter’s button
,
and
simultaneously till the siren chirps 1 time. Do
the same step (2) with other remote transmitters one after another, to let the main system learn codes of
each transmitter. (Maximum 4 remotes can be learned)
※
Note: The previously-memorized coding will be erased each time learning mode is activated.
