36. Features Programmed Table ( 1 )
Follow the steps as below.
(1)
Turn the ignition “ON” ( Engine must not be running)
(2)
Press and release the override switch 6 times.
(3)
Turn the ignition “OFF ” , siren chirps 6 times to confirm it has entered programming mode.
(4)
During programming mode, each press on override switch is followed by 1 siren chirp .The number of
siren chirps reflect default “ ON “ and “OFF” as shown in the chart below. The shaded value is the factory
default setting.
Features Program Table [1]
Operation of buttons
Pressing on
Over-ride switch
Program Options
K1
K2
K3
K4
1 time
Engine runtime upon each remote start for 5/
10
/15/20 min
□
5
□
10
□
15
□
20
2 times
Temp-controlled engine start at
-5º
/-10º/-20º/-30º
□
-5º
□
-10º
□
-20º
□
-30º
3 times
Crank time for each
remote start ( with longer stepup time
for next attempted remote start )
□
800ms
□1
000ms
□
1600ms
□
2000ms
4 times
CH # 2 output time
0.8s
/10s/30s/on.off
□
0.8s
□
10s
□
30s
□
On/off
5 times
CH # 3 output time
0.8s
/10s/30s/on.off
□
0.8s
□
10s
□
30s
□
On/off
6 times
