14.
Lock/arm shock sensor by pass
This features is used to avoid nuisances in case of alarm from shock sensor caused by heavy truck or train
passing by or thunder’s sound. Press and release both
【
】【 】
simultaneously (either the system is
Lock/arm or unlock/ disarm modes ) to make shock sensor inoperative but all alarm features still are in
standby mode.
【
Refer to lock/arm features
】
.
l
The remote transmitter sounds 1 buzz with its LCD showing shock sensor and lock icons
15.
Defective zoon by pass
When remote arming is activated; if there is a defective zone like the trunk being released or handbrake
not engaged, siren chirps 4 times with 2 parking light flashes. The defective zones is ignored and
bypassed. [If the defective zone is re-closed, the system enters full arm mode.]
l
The remote transmitter sounds 4 buzzes with its LCD showing the defective zone
16.
Alarm mode
&
warn away
While in arm mode, if the alarm is triggered by 1st stage shock sensor; the siren chirps twice with 2
parking light flashes (except the system is in MUTE ARM mode).
l
The remote transmitter sounds 2 long beeps with its LCD showing impact icon
While in arm mode, if the alarm is triggered by 2nd stage shock sensor; the siren chirps for 15 sec along
parking light flashes (except the system is in MUTE ARM mode).
l
The remote transmitter sounds long beeps for 15 sec with 2 vibrations. Its LCD shows impact icon
While in arm mode, if the door’s car is opened, trunk/hood is opened or the ACC is turned “ON”; the
siren blurts 30 sec with 60 sec parking light flashing. The start-kill takes effect.
l
The remote transmitter sounds long beep with vibration for 60 sec. Its LCD shows
icon of triggered zones.
※
In all above trigger modes, one press on
【
】
to deactivate the alert mode. A second press on
【
】
to get
system into Unlock/Disarm mode.
17.
Alarm trigger zone by pass with safety
For any abnormal situations like hijack mode, zone defects caused by hood/trunk open while
arming ,impact trigger or prolonged ACC “ON” while in arm mode; the engine-start is immediately killed
but siren blurts for 2 min. ( regardless of ARM or MUTE ARM),parking light flashes 2 min. Both siren
and parking light alert will stop after 2 min but the start-kill is still in effect. If the triggered zone is re-
closed, the whole alarm system restores to normal arm mode.
l
The remote transmitter sounds long beeps and vibrates for 60 sec.; its LCD shows “trigger icon”
18.
Panic
When the ignition is “OFF”, press and hold both
【
】
【
】
; siren chirps 3 times with 3 parking light
flashes.
l
The remote transmitter sounds melody and its LCD showing car’s status..
19.
Remote anti-carjack on
While the engine is running, press and hold both
【
】
【
】
to activate remote hi-jack mode. The alarm
system undergoes 3 alert stages. In the 1st stage, the parking light flashes for 20 sec. In the 2
nd
stage,
siren starts to chirp for 20 ~ 30 sec with the parking light still flashing. In the 3 rd stage, the siren blurts
for 30~ 60 sec with parking light flashing and the start kill takes effect.
l
The remote transmitter sounds alert with its LCD showing hijack mode icon.
To deactivate on-going carjack mode in any stage , press and release
【
】
20.
Anti-carjack switch
While the engine is running, press and release the anti-carjack switch (concealed near the alarm board ),
The alarm system undergoes 3 alert stages. In the 1st stage, the parking light flashes for 20 sec. In the 2
nd
stage, siren starts to chirp for 20 ~ 30 sec with the parking light still flashing. In the 3 rd stage, the siren
blurts for 30~ 60 sec with parking light flashing and the start kill takes effect. To deactivate on-going
carjack mode in any stage, press the anti-hijack switch for 5 sec.
l
The remote transmitter sounds alert with its LCD showing hijack mode icon.
21.
Valet mode by remote ON/OFF
【
Remote transmitter’s Features program table
】
or
【
Valet mode by
over-ride switch, refer to #37 Features program table
】
Press and hold both
【
】【 】
to turn the remote valet “ON” .Siren chirps 3 times with 3 parking light
flashes. The system loses all features except for lock
、
unlock, trunk release. While the valet “ON” mode.,
press and release
【
】【 】
simultaneously to turn the valet “OFF” where all features become normal.
