37
TROUBLE SHOOTING
Common Problems & Solutions
Playback
The DVD Recorder Does Not Power On
l
The AC power cord may be loose or not plugged in.
Make sure the power cord is secure in the AC socket
and the connector on the back of the recorder.
l
The unit may be in Standby Mode. Turn the recorder
on with the remote control Standby button, then wait
for a few seconds.
A Specific Disc Does Not Play
l
The disc may be dirty. Try cleaning the disc.
l
Make sure the disc is not in upside-down
l
The REGION CODE of the disc may not match that
of the recorder. In this case, the disc cannot be used.
This unit is a region 4 player.
The Remote Control Does Not Function
l
Make sure you're aiming the remote control directly
at the recorder remote control sensor, located on the
front panel.
l
Make sure there are no obstacles between the remote
control and the recorder.
l
The batteries may be drained. Try changing the
batteries in the remote control.
l
You could be using the remote control too far away.
Try within 4 meters from the recorder.
There is No Picture on the TV Screen
l
Make sure the connections from the recorder to the
TV are secure.
l
Verify that the TV's channel is set to match the video
input you are using. Refer to the TV's documentation.
l
On most TVs the "AUX In" , "Video In"or "A/V In"
channel should match the video input connector.
l
If you're using the S-Video connector, your TV may
have a seperate input channel for this type.
l
When inputting AV or S-video, there is sound but no
picture, Please ensure there is no PSCAN
compatibility issues.
The Picture Appears Stretched or Squeezed
l
The video aspect ratio may be set wrong for your
television type.
l
Enter the SETUP MENU and select the VIDEO setup
MENU. Try changing the TV display setting to
normal/PS (4:3 Pan & Scan) if you are using a
standard TV, or Wide TV(16:9 Wide) if your TV is a
Wide-Screen type.
The Disc Doesn't Eject
l
If the recorder is in Standby Mode (glowing red light
to the left of the disc tray), the disc will not eject.
Turn the recorder on with the remote control and then
eject the disc.
Distorted Picture when Connected to a VCR
l
This DVD recorder is built with Macrovision
copy- protection. This will distort the signal when
it is used with VCRs. Connect the recorder
directly to the TV.
Recording
Recording Will Not Start
l
The video input source may be protected with
Macrovision Copy or CGMS Protection.
l
The disc may already contain recordings of a
different TV System type - PAL or NTSC. If the
disc already contains a PAL recording, you cannot
record from an NTSC source, and vice versa.
l
The maximum number of titles - 48 - may have
been reached.
l
If the disc is a DVD
±
R, it may already be
FINALIZED
l
The disc is not a DVD
±
R/RW disc
The Disc Cannot be Erased
l
The disc is not a DVD
±
RW disc.
l
The disc may be dirty. Try cleaning the disc.
Recordings Do Not Play Other DVD Players
l
If the disc is DVD
±
R/DVD-RW, make sure it has
been FINALIZED.
l
The DVD player may not support DVD±R/RW
discs.
Timer Recording Does Not Start.
l
The time/date is invalid or conflicts with another
schedule.
l
The time/date settings of the recorder are
incorrect. Set the time/date in SETUP menu.
l
The specified video input source is unavailable.
l
The disc is out of space.
NOTE:
1.Switch the unit to standby before turning off.
2.After turning off the unit, wait at least 30 seconds
before turning back on.
3.Playback is not ensured if used with poor quality
DVD
±
RW discs. See recommended media table.
4.If the unit is kept in below zero (celsius)
temperatures for more than 30minutes, leave it in
a warmer environment (over 15 deg C) for an hour
before you plug in. This will help remove
condensation.
About Divx
Some discs with the extension MPEG4 are actually in
Real Video or other proprietary formats, eg, rm/ ra/
ram/ rmm/ WmV/ Lasf, ect , and are incompatible with
the international standard MPEG4. International
standard types include: SMI, SRT, SSA, SUB,TXT.
The subtitle file and the MEPG4 file must be saved
under the same file.
Содержание DVDR-X40
Страница 20: ......
