Wintal DVDR-X40, Руководство пользователя

Страница: 13 / 40

CONNECTIONS
Connecting the video output to your TV
In order to use the DVD recorder, you need to make both an audio and video connection to your TV. The capabilities
of your TV and the cables you have on hand will determine the connections you can use. There are 3 possible video
connection types:
- Composite Video - The most widely used, but lowest quality connection. This unit includes an Audio/Video
(A/V) cable for Composite Video.
- S-Video - A higher quality connection that requires an S-Video lead (not included) and an S-Video capable TV.
- Component Video - The highest quality video connection. Supported on high-end TVs and requires a component
lead (not included).
Composite Video (Typical connection)
This unit ships with a composite video (A/V) cable for connection to TV with a standard video input as shown below.
This is the most widely used type of connection. On most TV's, this connector is colored yellow, and is normally
accompanied by stereo audio inputs, colored red and white for stereo channels right and left respectively.
1 2
3
On your TV , select the video input. This is normally done
by Selecting Video 1 or
th the remote Vi deo Input wi
control. On some TV s, this is done by selecting a
particular channel.
Composite V ideo
Input Jack
Composite Video /
S tereo Audio Cable
,
Turn on the TV and DVD recorder and select the DVD
playback mode with the remote control.
V
TV with
Composite
Video Input
(Typical
Connection)
R
STEREO AUDIO IN
L
VIDEO INPUT
13
First, use the supplied A/V cable to connect the
composite video input on your TV to the video
output port on the DVDR-X40. Composite video
connections are normally a yellow-colored
connector that matches the video output on the back
of this unit. If you wish to hear sound through the TV,
connect the red and white stereo audio connections
as well.
For more information, pls consult your
television manual.
Note: The composite video input may be called
AV1, AV2 or VIDEO IN. Ensure that you connect
the audio leads into the same input group,
Eg: Av2 Audio L/R