Wintal DVDR-X40, Руководство пользователя

Страница: 17 / 40

Notes on power states
17
DVD RECORDER OPERATION
Powering on the unit Initial Setup Procedure
Only after all connections are complete, connect the
power cord and power on the unit.
1
2
Plug the power lead into a wall socket or power
strip.
Press STANDBY on the remote control or front panel
to turn the unit on. The system is now ready to use.
There are 3 power states for this unit:
1. OFF - not connected to the power cord. The unit draws
no power and cannot be turned on by the remote
control.
2. STANDBY - The unit draws a slight amount of power
to run the remote control receiving circuit.
3. ON - the standby button on the remote control or the
standby button on the front panel has been pressed.
The unit is ready to use.
Using the Menus
When the unit is first powered on, you'll be prompted to
set the time and date as well as set TV Tuner options.
You can always change any of the settings you chosen
during the initial setup later in the DVD recorder's
SETUP MENU.
2
Use the UP/DOWN keys to increase or decrease the
value of a selected field or move to a field above or
below. Use the LEFT/RIGHT keys to move to the
previous or next fields.
Press SELECT to select an option and continue.
Time and Date
Setting the time and date correctly is important, as timer
recordings depend on an accurate setting. The time format
used is 24H. Use the
UP/DOWN keys to increase or decrease
the time or date and the LEFT/RIGHT keys to move to a
different field. When you are done, press SELECT key.
The initial setup is now complete. Remember, any settings
chosen during the initial setup can be changed at any time in
the DVD recorder's SETUP MENU. Press SETUP to exit the
initial setup and begin using your DVD recorder.
1
Press SELECT to edit tim e.
Press RETURN to exit edit mode,
UP/DOWN or 0~9 to edit.
Press
1
Date(mm/dd/yy) 01/01/01
21:45:23 Time(hh:mm:ss)
SYSTEM SETUP-CLOCK
1
Date(mm/dd/yy) 01/01/01
21:45:23 Time(hh:mm:ss)
SYSTEM SETUP-CLOCK