![background image](http://html1.mh-extra.com/html/winnebago/horizon-40fd/horizon-40fd_manual_987486035.webp)
3-13
SECTION 3
DRIVING YOUR MOTOR HOME
Horn Bar
•
Normally sounds the chassis horn.
•
Also sounds air horns if Air Horn switch on
dash is activated.
Headlight Courtesy Flash
on Cruise Control Pad
•
Press and release to blink or flash the
headlights.
•
Night: If the headlights are already turned on,
pressing the switch will blink them off briefly.
•
Day: If the headlights are off, pressing the
switch will flash them on briefly.
(Truckers often use this signal to indicate to a
passing rig when it is clear to pull back into the
lane ahead of them.)
Marker Light Courtesy Flash
on Cruise Control Pad
•
Press and release to blink or flash the marker
(clearance) lights.
•
Night: If the marker lights are already turned
on, pressing the switch will blink them off
briefly.
•
Day: If the marker lights are off, pressing the
switch will flash them on briefly.
(Truckers often use this signal as a greeting or
an expression of thanks for assistance in passing,
etc.)
Cruise Control Functions:
On/Off (Cruise System On/Off)
•
Press to turn cruise control system on or off.
•
This will also erase previously set speed.
Set (Set Speed/Coast)
•
Press to maintain current desired driving
speed. Will not work below 40 mph.
•
This button will also perform “Coast” feature.
Press and hold until vehicle slows to desired
speed and release to establish new ‘set’ speed.
Res (Resume/Accel)
•
Press to return to previous ‘set’ speed after
braking or reducing speed.
Cancel
•
Press to switch cruise function off without
losing current ‘set’ speed.
Cruise Control
Pad
Horn Bar
Wiper Control
Pad