7-9
SECTION 7 –
PLUMBING
NOTE: If Waste Pump stalls, check breaker in
the load center. If problem persists,
remove black plug and motor shaft
access plate; then manually turn pump
shaft (located on the end of the Waste
Pump) with a screwdriver.
Further Information
For further Waste Pump operating and
troubleshooting information, see the
manufacturer’s user guide provided in your
InfoCase.
Dumping Holding Tanks
(Model 70BL)
1. Remove sewage drain hose from storage
compartment (located on passenger side
behind rear wheel).
2. Remove dust cap from sewage drain outlet
and connect sewage drain hose. Be sure it is
firmly attached.
3. Place the outlet end of sewage drain hose into
disposal opening.
4. Open the Black Waste Tank Drain valve with
a quick pull and make sure there are no sags in
the hose. Close Black Waste Tank Drain valve
as soon as tank is empty.
Waste Pump
(Located beneath motorhome)
•
With black plug removed you will be able
to remove the motor shaft access plate.
-Typical View
• Motor Shaft Access
Plate
Sewage Drain Hose
(Located on passenger side
behind rear wheel)
-Typical View
Sewage Drain Outlet
(Located on driver side front of rear wheel)
*Model 70BL
