SECTION 7 –
PLUMBING
7-6
Turn the pump on as you begin to shower and
leave running to remove the water from the floor
while showering.
Turn the pump off when the water is
completely removed after finishing the shower.
Shower Drain Strainer and Filter
The drain sump area in the shower has a
strainer and filter to keep debris from entering the
lines and damaging the pump. The strainer and
filter should be removed periodically for
cleaning.
The strainer screws into the floor of the sump
area. If the strainer is difficult to remove,
additional grip can be gained by wrapping a wash
cloth around the top of the strainer.
The filter is located underneath the shower
drain strainer. Remove the strainer to access the
filter.
Rinse off the debris, soap or water mineral
deposits from the strainer and filter. Reinsert
filter and screw the strainer back into shower
floor.
Shower Pump Filter Screen
The shower pump (located beneath driver side
bed cabinet) also has a filter screen that should be
inspected periodically and cleaned if necessary.
Shower Drain Switch
(Located near shower head)
-Typical View
Shower Drain Strainer
(Located in shower floor)
-Typical View
Shower Drain Filter
(Remove Shower Drain Strainer
to access filter.)
-Typical View
Shower Pump
(Located beneath driver side bed cabinet)
-Typical View
