SECTION 6 –
ELECTRICAL
6-10
PURE
3
DC SYSTEM (VOLTA)
Activate System (Discharging)
NOTE: The Volta gauge/button is equipped with
a magnetic cover to dim the lights at
night.
1. Press and Release the Pure
3
ON/OFF button.
Wait for approximately 5-10 seconds and the
button will illuminate green.
2. The State of Charge (SOC) gauge will also
illuminate and show the current state of
charge of the Pure
3
battery pack.
WARNING
Only Volta approved technicians should
service the Pure
3
energy storage and
power distribution system.
For safety reasons end users and other
untrained individuals should not attempt
to open or tamper with the battery pack or
any other components of the Pure
3
energy storage and power distribution
system.
Pure
3
energy storage packs are designed
for connection and operation with Volta
Power Systems power distribution
devices or equipment expressly
approved by Volta Power Systems. This
ecosystem of approved devices is a layer
of safety within the Pure
3
system and use
of other devices compromises this layer
of safety. Use of the Pure
3
energy storage
pack with other external devices could
present a hazard and is expressly
prohibited by Volta Power Systems as
well as voiding the Volta Power Systems
warranty.
WARNING
Carbon-monoxide (CO), moving parts,
and Shock can cause severe injury or
death.
Turn off Volta Pure
3
system to store or
garage RV and before servicing RV
electrical systems.
CAUTION
The Pure
3
Power System components
are designed to work safely together as a
system. Components and devices in the
Pure
3
Power System should not be
opened or modified. Only a Volta
approved technician should perform
service work on a
Pure
3
system.
Pure
3
ON/OFF Button
(Located on an interior cabinet)
-Typical View
