3
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
59
Installation, Operating and
Maintenance Instructions
3.8 Non Winkhaus access control system (ACS)
3.8.2 Non Winkhaus access control system ACS
fingerprint (sash side)
Prerequisites for installation
• The applied access control system have to be installed into the door sash.
• With the specified cable transition set "T-SET KÜ-T1 FT INTEG-BM 3.5 + 1.5
M EST", it is possible to set additional access controls and opening signals
(potential-free signal: e.g. "Open" button, intercom , ...).
If the blueMotion multipoint lock is used for others, as the aforementioned sys-
tems (such as transponder set, remote control), note the following points:
• We recommend the Winkhaus power supply T-HT NETZTEIL 24 V DC / 2,5
A (Art.-No. 2126934) or the frame power supply T-NETZTEIL RAHMEN 24 V
DC 1 A (2 A / 2 S) (Art.-No. 5038589) to use.
• For details on the voltage supply see also chapter 2, power supply
.
• Ensure that the decontrol signal takes place over a potential-free contact
when using non-Winkhaus access control systems.
• If required use a coupling relay for realizing this.
3.8.1 Non Winkhaus access control system ACS general
(frame- and sash side)
