Notice:
If no separable cable transition (e.g. T-HT KÜ M1188) or
no Winkhaus cable transition is used, then the cable "T-HT
CONNECTION CABLE 6 M FOR MOTOR" for motor housing
(2522881) must be used.
Notice:
The Winkhaus power supply 24 V DC is designed for the
operation with Winkhaus locks. In addition, small consumers
(e.g. fingerprint in the door element) can be supplied with
this power supply - up to on additional power requirement of
max. 0.5 A and the voltage requirement must match the power
supply (24 V DC).
Notice:
Operation of a second blueMotion with the same power
supply is not possible. A separate power supply must be used
for each lock.
If you do not use the Winkhaus power supply unit, please keep
in mind the following information:
• Power supply 24 V DC (stabilized)
• min. 1,5 A continuous current (min. 2 A peak current)
• min. 36 W
2
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
24
Installation, Operating and
Maintenance Instructions
Power supply
External power supply
Power supply unit for blueMotion 100 - 240 V,
50 / 60 Hz, 24 V DC / 2,5 A, to be installed on
a top hat mounting rail, includes connection
diagram
T-HT POWER SUPPLY 24 V DC / 2,5 A
2126934
