4
EN
Aug. Winkhaus GmbH & Co. KG
∙ Berkeser Straße 6 ∙ 98617 Meiningen
T +49 369 3950 - 0 ∙ www.winkhaus.de ∙ Subject to technical changes
blueMotion
5044745
81
Installation, Operating and
Maintenance Instructions
• For programming via the receiver, it will have to be freely accessible.
• Press the P1 key of the receiver until the green LED lights up.
• Release the key.
• Use the desired key of the remote control while the LED is lit up.
• As long as the LED is lit, you can program additional remote control keys.
Display memory full: The memory has been filled to capacity (max. 85 keys), if
the teach-in keys of a new wireless remote control is used and both LED displays
of the receiver flash simultaneously.
Teaching wireless remote control directly via the receiver
Deleting wireless remote control directly via the receiver
Partial deleting
• Press and hold the P1 key of the receiver until the green LED lights up.
• Release the key.
• Press the key of the wireless remote control while the LED is lit up.
• A taught-in wireless remote control will be deleted automatically.
• A wireless remote control that has not been taught will be programmed
(see "Teaching wireless remote control directly via the remote control").
No. Name
P1 key
green LED
red LED
buzzer
relay
jumper 12 V / 24 V
