Winget 200TM, Руководство по ремонту

Страница: 54 / 149

200TM MOTOR & CONTACTOR CONNECTIONS
415VOLT DIRECT ON LINE CRABTREE 6-10AMP
OVERLOAD RELAY
Contactor-Overload Relay-Stop Button Connections
Markings for terminals L1, L2, L3 & NO on front of the Contactor will be obscured
once the auxiliary contact block is slid in place on front of the Contactor. Use visible
terminal markings 1, 3 & 5 for incoming 415V supply
.
Before fitting Overload Relay to underside of Contactor connect small grey
Wire to terminal A2 below Contactor
Remove any existing link between terminals 96 and 64 to allow connection of external
Emergency Stop Button.
Link terminal 5 on upper face of Contactor to terminal 63NO
Link terminal 95 on Overload Relay to terminal A2 on upper face of Contactor
Link terminal 1 on upper face of Contactor to terminal A1, also on upper face of
Contactor
No external wiring link fitted between 51NC and 52NC on auxiliary contact block
Connect Emergency Stop Button to terminal 96 on Overload Relay and terminal 64NO
on Contactor
Link W2, U2 & V2 in motor connection box using brass links supplied.
Overload Relay to Motor Connections
Link T1 (2 on O/L Relay) to U1, Red Wire
⎞
Link T2 (4 on O/L Relay) to V1, Yellow Wire
>
or use all red cables
Link T3 (6 on O/L Relay) to W1, Blue Wire
⎠
Use 2.5/4mm
2
Cable size