TECHNICAL SPECIFICATIONS
FLX3 980087 04/01/03
3-1
ITEM
DIMENSION/CAPACITY
Rated Voltage
36VDC
Rated Amperage
90 Amps
Batteries
6 x 6 Volt 360 AH @ 20hr rate
Scrub Brush Motors
2 x .75 hp (0.56 kW)
Vacuum Motor
2 x .75 hp (.056 kW) @ 18,000 rpm
Propelling Motor
2 hp (.745 kW) @ 2700 rpm, 27A
Mass (GVW)
2102 lbs. (953 kg)
Weight empty without batteries
914 lbs. (415 kg)
Solution Control
Gravity feed, fully variable with automatic shut-
off in neutral
Solution tank capacity
35 gal. (132l)
Recovery tank capacity
35 gal. (132l)
Scrub brush diameter for 34 in. (86 cm) disk
scrub head
17 in (43.0 cm)
Scrub brush diameter for 34 in. (86 cm)
cylindrical scrub head
6 in (15.2 cm)
Scrub brush length for 34 in. (86 cm) cylindrical
scrub head
32 in. (81.3 cm)
Scrub brush pressure
0-200 lbs. (0-91 kg)
Scrub brush speed (Disk)
200 rpm
Scrub brush speed (cyl)
800 rpm
Tires
4 x 16 in (40.64 cm) foam filled black knobby
standard.
Maximum speed
6.2 mile/hour (10k/hr)
Coverage
49,300 sq. ft/hr (4,590 sq. m/hr) at 3.5 mph
(5.6k/hr) with 2 in (5 cm) overlap.
Frame construction
Welded cold rolled steel and steel plate with
epoxy powder coat finish.
Brakes
Dual self centering mechanical 6 in (15.24 cm)
disc with hand lock parking brake.
Minimum aisle u-turn width
96 in (243.8 cm)
SPECIAL NOTES:
The sound pressure level at the operator’s ear
was measured to be 76 dBA. This was a
nearfield, broad-band measurement taken in a
typical industrial environment on a tile floor. This
appliance contains no possible source of impact
noise. The instantaneous sound pressure level is
below 63 dBA.
The weighted root mean square acceleration at
the operator’s arms was measured to be below
2.5m/s². this was a tri-axial, third-octave-band
measurement made during normal operation on a
composite tile floor. The measurement and
related calculations were made in accordance
with ANSI S3.34-1986.
