Windhager BioWIN XL BWE 350 NA, Руководство по установке, Страница: 58 / 72

58
4. For the Service Technician
BioWIN XL BWE 350 NA BWE 450 NA BWE 600 NA
Minimum Maximum Minimum Maximum Minimum Maximum
Factory setting: rpm 750 2100 1100 2600 1050 2700
Setting range: rpm 750–950 2000–2400 1000–1300 2600–2700 950–1250 2600–2700
Minimum operating time with buffer
This function is not yet available.
Correction of cleaning interval
The cleaning interval is dependent both on the ash removal profile, and on the
proportion of ash in the pellets. This setting can be used to extend or shorten
the cleaning interv
al by ±50 %.
The standard setting is a cleaning interval determined by testing.
Factory setting: 0 %
Setting range: ±50 %
Fig. 133
Correction of Cleaning interval
Actual value
0 %
min. -50 %
max. +50 %
– save back +
Flue gas thermostat or air intake/exhaust flap
This setting can be used to change the flue gas thermostat function (factory
setting) to the air intake/exhaust flap function.
Factory setting: Flue gas thermostat
With air intake/exhaust flap setting (Fig. 135):
Factory setting: Operating time 300 sec.
Setting range: 30 – 600 sec.
Fig. 134
Flue gas thermostat or Air intake
flap
Flue gas thermostat
Air intake/exh. flap
choose back
Fig. 135
Air intake/exh. flap
Operating time
300 sec.
min. 30 sec.
max. 600 sec.
– save back +
Limits for blower speed
Fig. 136
Limits for blower speed
Minimum 1100 rpm
Maximum 2600 rpm
choose back
Fig. 137
Minimum operating time
with buffer
Actual value
60 min.
min 0 min.
max 180 min.
– save back +
CAUTION
If too long of a cleaning interval is selected, the
ash container may overfill.
INFORMATION
The set operating time should be twice as long
as the actual operating time of the air intake/
exhaust flap.