1.
While seated in the chair, pull back on either of the recline
levers
(A)
, located on either side of chair, to activate the leg
rest into the recline position.
2.
To operate the infinite back positioning, pull back on the
recline lever and adjust the upholstered back angle by
pushing back with your body until desired angle has been
reached.
Release recline lever
(A)
when you have achieved the
desired angle to lock the back into position.
•
DO NOT
push or pull leg rest to maneuver chair.
•
DO NOT
attempt to
stand or sit on the leg rest.
•
DO NOT
place hands, legs, or feet under seat, mid-
ottoman, or leg rest.
•
Stay clear of recline mechanism when operating chair.
Page 21 of 32
Document No.: 006335
Revision: K
OWNERS OPERATING & MAINTENANCE MANUAL
INVERNESS 24-HOUR TREATMENT RECLINER™
RECLINE WHILE IN THE SEATED POSITION
1
NOTE
:
Activate the leg rest by pulling the recline lever
(A)
1/2 way
out. To recline the back, fully extend the recline lever
(A)
.
2
OPERATING INSTRUCTIONS: OCCUPANT
