manualshive.com logo in svg

Winco Inverness 24-Hour Treatment Recliner, Руководство владельца по эксплуатации и обслуживанию

Поделиться
Скачать
Winco Inverness 24-Hour Treatment Recliner Скачать руководство пользователя страница 24

TROUBLESHOOTING:

• 

With system disconnected from power source, use a 

DAMP CLOTH ONLY

 to clean switch, wiring 

or power pack (located under seat frame).

• 

If there is no heat or massage or flashing light on the switch - check power cord connections to 
wall outlet 

AND

 connection of power cord to power pack unit under chair.

• 

If switch displays a flashing light, disconnect from wall, check all accessible wire connectors 
under chair for possible loose connections, then re-plug into wall and test again.

• 

If system still does not work contact Winco customer service: 1-800-237-3377.

CORD STORAGE:

For models with Heat (HT) or Heat & Massage (HM)

To prevent tripping on cord, damage to cord, or damage to recliner, the power 
cord should be coiled and stored in the "Hook & Loop" fastener provided 

BEFORE

 

moving chair or whenever Heat / Heat & Massage is not in use (as shown below).

Page 24 of 32

Document No.: 006335 
Revision: K

OWNERS OPERATING & MAINTENANCE MANUAL

INVERNESS 24-HOUR TREATMENT RECLINER™

HEAT / HEAT & MASSAGE OPERATION - CONTINUED

Содержание Inverness 24-Hour Treatment Recliner

































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды