12
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660 or email: [email protected]. Hours: 7 am to 6 pm MST.
Can i use my own cable for my installation?
Yes! However, the commonly available low-loss RG6 cable included with your product has been specifically
selected for the SIGnALBOOST DT . RG6 is a commonly available cable, you can buy it from Wilson
Electronics, or from your local electronics/hardware store . Use of another type or longer length of cable will
likely degrade the system’s performance .
There are frequently several people using cell phones in my office at the same time – will the SignalBooST
DT improve the signal for all of them?
Absolutely! The SIGnALBOOST DT is designed to support multiple users simultaneously (within the range of
the Desktop Antenna) .
Can i use different antennas than the ones supplied in the box?
Yes! While the SIGnALBOOST DT is designed to give you reliable signal improvement with the included
antennas, Wilson Electronics offers a variety of optional antennas and accessories that enable you to
customize your SIGnALBOOST DT to your specific needs . Visit
www.WilsonElectronics.com
for details .
i have questions about my installation – where can i get some help?
Wilson Electronics Technical Support representatives are just a phone call or email away .
Call 866-294-1660 or 435-673-5021, or send an email to tech@wilsonelectronics .com .
For Weak areas with Insufficient Signal
In areas with particularly weak outside
signals, additional coverage can be
obtained by upgrading the inside antenna
and replacing it with a high-gain inside
Panel Antenna (Wilson part #301147) .
This antenna (which includes RG58 cable)
can double the inside coverage area
(See Figure 13) . Additional coverage can
be obtained by upgrading to the outside
antenna option to #301157 Outdoor
Panel or #304475 Wide Band Directional
Antenna .
Signal
Booster
Cell
Tower
Cradle
antenna
Panel
antenna
Figure 13
Optional Panel Antenna
(with cable) for improved coverage
inside the building
(Wilson part # 301147)
Minimum 15
feet separation
