Wilson Electronics 275370 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Wilson Electronics 275370 Скачать руководство пользователя страница 2

1

Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660

or email: [email protected]. Hours: 7 am to 6 pm MST.

How it Works

Wilson Electronics Signal Boosters are bi-directional devices that deliver
service levels consistent with what would be expected in areas of high cell
network coverage. They amplify a weak or shadowed signal in mobile,
marine, M2M and in-building applications. When using a Wilson Electronics
Signal Booster in conjunction with Wilson Electronics antennas, the
Outside Antenna will collect the cell tower signal and send it through the
cable to the Signal Booster. The signal is then amplified and re-transmitted
through the Inside Antenna into the room. Cell phones and cellular data
cards in that area then communicate with the improved signal. When a
cell phone or cellular device transmits, the signal is received by the Inside
Antenna, amplified by the Signal Booster and transmitted back to the cell
tower through the Outside Antenna.

Inside this Package

Signal

Booster

AC/DC

Power Supply

5V / 4A

(859998)

To purchase, call Wilson Electronics Sales Department at: 800-204-4104

Outdoor Antenna Options

Indoor Antenna Options & Accessories

1. Wide Band Directional Antenna
700-2700 MHz (304411)
2. Pole Mount Panel Antenna
700-2700 MHz (304453)

A. Wide-Band Panel Antenna 700-2700 MHz
(multiple mounting options)
B. 50 Ohm Lightning Surge Protector with N-Connector (859902)
Splitter options on page 8

2

1

B

A

Note:

Kits may contain different accessories

Appearance of device and accessories may vary.

Installation Instructions for the Following Wilson
Electronics Signal Booster:

Tri-Band 4G-V Adjustable Gain 700 (Band 13) / 800 / 1900 MHz
In-Building Wireless Smart Technology

™

Signal Booster

(Band 13 is 700 MHz Verizon

™

LTE)

Model # 275165 FCC ID: PW0275165

Tri-Band 4G-A

Adjustable Gain 700 (Band 12/17) / 800 / 1900 MHz

In-Building Wireless Smart Technology

™

Signal Booster

(Band 12/17 is 700 MHz AT&T

®

LTE)

Model # 275370 FCC ID: PW0275370

«
1
2
3
4
...
»

Содержание 275370

















Отзывы:

Нет отзывов