
12
Contact Wilson Electronics Technical Support Team with any questions at 866-294-1660
or email: [email protected]. Hours: 7 am to 6 pm MST.
Warnings and Recommendations
Warning: The Directional Antenna must always be located so the
back or side points to the Inside Antenna. Never point the
front of the Outside Antenna toward the Inside Antenna –
this is to prevent oscillation.
Warning: Connecting the Signal Booster directly to the cell phone with
use of an adapter will damage the cell phone.
Warning: Use only the power supply provided. Use of a non-Wilson
Electronics product may damage your equipment.
Warning:
RF Safety
: All Inside Antennas used with this Signal
Booster may not have gain (less cable loss) that exceeds 9
dBi and must be located at least 8 inches from all people.
Outside Antennas may not have gain (less cable loss) that
exceeds 15 dBi and must be located at least 23 inches
from all people. All antennas shown on page 1 meet these
requirements.
Warning:
RF Safety:
All Inside Antennas used with this Signal
Booster may not have gain (less cable loss) that exceeds
8.6 dBi and must be located at least 8 inches from all
people. Outside fixed antennas may not have gain that
exceeds 15 dBi (less cable loss) and must be located at
least 23 inches from all people. All antennas shown on
page one meet these requirements.
Warning: Verify that both the Outside Antenna and the Inside
Antenna are connected to the Signal Booster before
powering up the Signal Booster.
Recommendation:
Lightning Surge Protection is recommended for all in-
building installations.
This device complies with Part 15 of FCC rules. Operation is subject to two
conditions: (1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that
may cause undesired operation. Changes or modifications not expressly
approved by Wilson Electronics could void the authority to operate this
equipment.