
111089_Rev05_01.16.13
Signal Booster Specifications
Tri-Band 4G-V
Tri-Band 4G-A
Model Number
275165
275370
Antenna connectors
N-Female
N-Female
Antenna impedance
50 Ohms
50 Ohms
Dimensions
8.875 x 6.0 x 1.5 inch (22.5 x 15.2 x 3.8 cm)
8.875 x 6.0 x 1.5 inch (22.5 x 15.2 x 3.8 cm)
Weight
2.8 lbs (1.270 kg)
2.8 lbs (1.270 kg)
Frequency
746-787 MHz / 824-894 MHz / 1850-1990 MHz
698-746 MHz / 824-894 MHz / 1850-1990 MHz
1
Passband Gain (nominal)
70 dB Typical / 77 dB Maximum
70 dB Typical / 81 dB Maximum
2
20 dB Bandwidth (nominal)
Uplink
Downlink
Uplink
Downlink
700 MHz
800 MHz
1900 MHz
N/A
25 MHz / 28 MHz Max
60 MHz / 66 MHz Max
N/A
25 MHz / 28 MHz Max
60 MHz / 66 MHz Max
N/A
25 MHz / 28 MHz Max
61 MHz / 67 MHz Max
N/A
25 MHz / 28 MHz Max
61 MHz / 67 MHz Max
3
Power output for single cell phone
(uplink) dBm
Max Average Power
Max Average Power
700 MHz
800 MHz
1900 MHz
25.0
28.6
29.4
26.8
28.3
29.3
3
Power output for single cell phone
(downlink) dBm
Max Average Power
Max Average Power
700 MHz
800 MHz
1900 MHz
22.9
24.9
25.1
24.9
25.3
25.2
Noise Figure (typical downlink/uplink)
4 dB nominal
3.5 dB nominal
Isolation
> 90 dB
> 90 dB
Power Requirements
110-240 V AC, 50-60 Hz, 20 W
Notes:
1. Nominal gain is the maximum gain at any frequency in the passband.
2. Nominal bandwidth is the difference between two frequencies that are adjacent to the passband where the amplification is 20 dB lower than the passband
amplification. One of the frequencies is lower than the passband and the other is higher.
3. The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the rating would have
to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This power reduction is to be by means
of input power or gain reduction and not by an attenuator at the output of the device.
4. The maximum power for 2 or more simultaneous signals will be reduced by 6 dB every time the number of signals is doubled.
3301 East Deseret Drive, St. George, UT 84790
For additional Technical Support visit www.WilsonElectronics.com
or email at: [email protected]
Phone: 866-294-1660 Local: 435-673-5021 Fax: 435-656-2432
www.twitter.com/WilsonCellular www.facebook.com/WilsonCellular