Wilo Wilo-DrainLift KH 32-0,4, Инструкция по установке и эксплуатации

Страница: 19 / 77

ENGLISH
14
Fault Cause Remedy
Motor does not run Lack of voltage Check voltage and fuses
Cutting implement blocked, Dismantle cap, rotate motor shaft clockwise freely,
overload switch
clean cutting implement. In the event of reoccurrence,
disengaged contact customer services.
motor overloaded, overload If the event of reoccurrence, contact customer
switch disengaged
services.
booster relay defect contact customer services
motor defect contact customer services
motor runs, pump pressure pipeline blocked remove blocking or buckling
does not function or buckled carry out test run
unit ventilation blocked remove and clean ventilation pipe or replace activated
carbon filter
pump runs in short ventilation blocked clean ventilation
intervals
leak in flap trap clean or replace
cistern ventilation stops reproduce function
motor makes loud foreign bodies in unit Dismantle motor and clean. If necessary, contact
noises when rotating customer services.
8. Faults, causes and remedies
If the fault cannot be remedied, please contact your local plumbing and heating specialist or Wilo
customer services.
Subject to technical alterations!