Wilo VeroLine IP-E 40/160-4/2 Series, Инструкция по установке и эксплуатации

Страница: 97 / 196

English
Installation and operating instructions Wilo-VeroLine IP-E, Wilo-VeroTwin DP-E 93
12 Spare parts
Spare parts may be ordered via a local specialist retailer and/or Wilo-
customer service.
To avoid queries and incorrect orders, all data on the name plate
should be submitted with each order.
CAUTION! Risk of material damage!
Trouble-free pump operation can only be guaranteed when origi-
nal spare parts are used.
• Only use original Wilo spare parts.
• Each component is identified in the table below.Information to be
provided when ordering spare parts:
• Spare part number
• Name/description of the spare part
• All data on the pump and motor name plate
Spare parts table See Figs. 5 for a labelled illustration of each component.
Technical information subject to change without prior notice!
No. Part Details
1.1 Impeller (set)
1.11 Impeller
1.12 Circlip
1.13 O-ring
1.2 Mechanical seal (set)
1.12 Circlip
1.13 O-ring
1.21 Mechanical seal
1.22 Spacing ring
1.3 Motor
3 Pump housing (set)
1.13 O-ring
3.1 Pump housing
3.2 Screw plug (for R1)
3.3 Valve (for double pump)
6 Differential pressure sensor
(set)
7 Module (set)
7.1 Module
7.3 Module over
7.4 Screws
7.5 Tooth lock washers
8.2 Bleed valve