Wilo VeroLine IP-E 40/160-4/2 Series, Инструкция по установке и эксплуатации

Страница: 83 / 196

English
Installation and operating instructions Wilo-VeroLine IP-E, Wilo-VeroTwin DP-E 79
Pressure value correction On
5.7.6.0 SBM function Setting for behaviour of signals
SBM run signal
SBM readiness signal
SBM mains On signal
5.7.7.0 Factory setting OFF (default setting)
Settings are not changed by
confirming. Not displayed when
“access disable” is active
ON
Confirming will reset the set-
tings to factory settings.
Caution!
All manual settings will be lost.
Not displayed when
“access disable” is active
6.0.0.0 Error acknowl-
edgement For additional information, see
Section 11.3 “Acknowledging
errors” on page 88. Only displayed if an error is
present
7.0.0.0 Access disable “Access disable” inactive
(changes possible)
(for further information, see
8.6.7 “Activating/deactivating
access disable” on page 73)
“Access disable” active (no
changes possible)
(for further information, see
8.6.7 “Activating/deactivating
access disable” on page 73)
No. Designation Type Symbol Values/explanations Display conditions
±
±
±
±