Wilo Helix VE 10 Series, Инструкция по установке и эксплуатации

Страница: 44 / 198

44
5.4 Accessories
The following original accessories are available for
the Helix series:
• IF module PLR for connecting to PLR/interface
converter
• IF module LON for connection to LONWORKS
network. These modules plug directly into
the connection interfaces of the converter
(see Fig. below).
• Non-return valves (with tab or spring ring for
operation at constant pressure)
• Protection kit against dry­running
• Pressure sensor kit for control (accuracy: ≤ 1 %;
use between 30 % and 100 % of the measure -
ment range).
Use only accessories that are new.
Type key Article n
o
.
2 Round counterflanges, stainless steel, 1.4404 (PN16 – DN50) 4038587
2 Round counterflanges, stainless steel, 1.4404 (PN25 – DN50) 4038589
2 Round counterflanges, steel, (PN16 – DN50) 4038585
2 Round counterflanges, steel, (PN25 – DN50) 4038588
2 Round counterflanges, stainless steel, 1.4404 (PN16 – DN65) 4038592
2 Round counterflanges, stainless steel, 1.4404 (PN25 – DN65) 4038594
2 Round counterflanges, steel, (PN16 – DN65) 4038591
2 Round counterflanges, steel, (PN25 – DN65) 4038593
2 Round counterflanges, stainless steel, 1.4404 (PN16 – DN80) 4073797
2 Round counterflanges, stainless steel, 1.4404 (PN25 – DN80) 4073799
2 Round counterflanges, steel, (PN16 – DN80) 4072534
2 Round counterflanges, steel, (PN25 – DN80) 4072536
Bypass kit 25 bar 4124994
Bypass kit (with pressure gauge 25 bar) 4124995
Baseplate with dampers for pumps up to 5.5kW 4157154
Power (kW)
0.55 0.75 1.1 1.5 2.2 3 4
6. Description and function
6.1 Description of the product
Fig. 1
1 ­ Motor fixation bolt
2 – Coupling guard
3 – Mechanical seal
4 ­ Hydraulic stage housing
5 – Impeller
6 – Pump shaft
7 – Motor
8 – Coupling
9 - Lantern
10 ­ Tube liner
11 ­ Flange
12 ­ Pump housing
13 - Base plate
Power (kW)
5.5 7.5
5,5 7,5
Power (kW)
11 15 18.5 22
English
WILO SE 03/2019