Wilden PRO-FLO P8, Инструкция по эксплуатации и техническому обслуживанию

Страница: 9 / 32

WIL-10187-E-05 9
P8 Clamped Plastic
P8 PLASTIC
REDUCED-STROKE
PTFE-FITTED
Ship Weights……Polypropylene 34 kg (75 lb)
PVDF 43 kg (95 lb)
Air Inlet……………………..……..13 mm (1/2")
Inlet…...…………………...…………51 mm (2")
Outlet………………...………………51 mm (2")
Suction Lift…………………….4.27 m Dry (14')
9.45 m Wet (31')
Disp. per Stroke 1 ……...…......1.78 L (0.47 gal)
Max. Flow Rate……………481 lpm (127 gpm)
Max. Size Solids…………………6.4 mm (1/4")
1
Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example:
: To pump 238 lpm (63 gpm) against
a discharge pressure head of 2.1 bar (30 psig)
requires 4.1 bar (60 psig) and 94 Nm
3
/h (55
scfm) air consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
P8 PLASTIC
FULL-STROKE
PTFE-FITTED
Ship Weights……Polypropylene 34 kg (75 lb)
PVDF 43 kg (95 lb)
Air Inlet……………………..……..13 mm (1/2")
Inlet…...…………………...…………51 mm (2")
Outlet………………...………………51 mm (2")
Suction Lift……………………...6.4 m Dry (21')
8.6 m Wet (28.4')
Disp. per Stroke
1
……...…........2.6 L (0.69 gal)
Max. Flow Rate……………562 lpm (148 gpm)
Max. Size Solids…………………6.4 mm (1/4")
1 Displacement per stroke was calculated at 4.8
bar (70 psig) air inlet pressure against a 2.1 bar
(30 psig) head pressure.
Example: To pump 409 lpm (108 gpm) against
a discharge head of 2.1 bar (30 psig) requires 5.5
bar (80 psig) and 148 Nm 3 /h (94 scfm) air
consumption.
Flow rates indicated on chart were determined by pumping water. For optimum life and performance, pumps
should be specified so that daily operation parameters will fall in the center of the pump's performance curve.
Caution: Do not exceed 8.6 bar (125 psig) air supply pressure.
PERFORMANCE