EN
34
WIKA operating instructions, model CTR3000
14191761.01 05/2019 EN/DE
6.4.2.10 Probes – Alarm for probes
After pressing the button
[Alarm for probes]
on the left side, the sub menu opens on the right.
The option is between having an alarm for probes or not.
If
On
selected, then the measured temperature is compared with T
max
(set under probes). If T
max
< measured temperature,
then an error appears. An exclamation mark appears to the left beside the button
13
.
The set alarm setting will be indicated in the button
[Alarm for probes]
on the right side.
6.4.3
Application [Probes]
Higher accuracy measurements can be made using calibrated thermometers whose characteristics have been determined.
Before being used, the thermometer and its calibration details must be entered into the CTR3000.
For this pressing on the main screen the button
[Probes].
The sub-menu on the left side opens.
All necessary settings can be made here.
■
For each new thermometer the coefficients can be entered.
■
For already existing probes the settings can be changed.
■
Thermometers can be deleted via the recycle bin.
■
Thermometers can be found quickly using the button
[Search...]
button.
All thermometer will appear in the list below
“Configure existing probes”.
The maximum cable length of a temperature probe is 2 m.
6. Commissioning, operation
