Kunststoffschweißtechnik
WIDOS
Einsteinstr. 5
Phone +49 (0) 71 52 99 39 - 0
W. Dommer Söhne GmbH D-71254 Ditzingen-Heimerdingen
Fax
+49 (0) 71 52 99 39 - 40
Website:
www.widos.de
Email:
10.12.2013 Working
instructions
WIDOS PSM 20
Page 6 of 31
1. Description of product
This chapter gives important basic information about the product and its prescribed use.
All technical details of the machine are put together as a general arrangement.
1.1. Usage
and
non-intended use
The
WIDOS
PSM 20
is a workshop machine for the heating element butt welding of sheets
made out of PE and PP for the thickness range up to 20 mm and
width
of plate up to 2000
mm.
Any other use of this machine is non-intended.
The machine is only to be used in a technically perfect condition as well as intended, safety-
and danger-conscious in compliance with the working instructions and the relevant safety
regulations (especially the regulations for the prevention of accidents).
The described plastic welding machine may only be operated, maintained and repaired by
persons who are trained and informed about the dangers.
The manufacturer is not responsible for any damages caused by inappropriate handling or
operation.
For personal injuries, material and property damages resulting herefrom, only the user is
responsible!
Prescribed use also means:
following all indications of these working instructions and
performing the inspection and maintenance work.
1.2. Safety
measures
In case of wrong use, wrong operation or wrong maintenance, the machine itself or products
standing nearby can be damaged or destroyed.
Persons in the endangered area may be injured.
Therefore these working instructions have to be thoroughly read and the corresponding safety
regulations must necessarily be observed.
1.3. Conformity
The machine corresponds in its construction to the valid recommendations of the European
Community as well as to the European standard specifications.
The development, manufacturing and mounting of the machine were executed very carefully.
