Kunststoffschweißtechnik
Operating
and
indicating elements
Chapter 4
10.12.2013 Working
instructions
WIDOS PSM 20
Page 18 of 31
Lift the heating element and fix it additionally in the height by
a spacer.
The machine features (optional) spacers for a sheet
thickness of 10 / 15 / 20 mm of the horizontal sheet.
Always align spacer and sheet thickness to each other in
order that the vertical sheet is only heated at the welding
area.
Spacer height 65 mm for sheet thickness of 10 mm
Spacer height 70 mm for sheet thickness of 15 mm
Spacer height 75 mm for sheet thickness of 20 mm
Remove the spacer after heating, otherwise the heating
element cannot swing downwards.
4.4. How to open the clamping beam to remove the pieces
Lift the clamping beam at the front and swing the piston rods forwards out.
Now remove the angle or the pipe forwards out of the machine.
Since the clamping beam is very heavy, you may insert a spacer between
clamping beam and support in order to remove a welding piece.
The spacer may have a height of
max. 60 mm
, otherwise it may damage the
rear part of the piston rod!
Lift the clamping beam at the front, remove the space and swing the
piston rod in again; the beam must rest on the washer afterwards.
Insert the spacer here into the base
frame of the lifted heating element.
Swung out
piston rod
Insert spacer
here,
(max. 60 mm)
