Ku nst sto ffschweißtec hni k
Starting and operating
Chapter 5
30.07.12
Working Instructions WIDOS 10000 mobile
Page 21 of 52
5.2. How to connect the machine
•
Connect the mains plug to the local power supply (CEE 63A / 400 V / 50 Hz, right-hand rotary
field).
Observe correct mains voltages.
Lay the hydraulic and electric wires carefully (danger of stumbling).
Check whether the machine is connected right-handedly!
For this purpose let e.g. the planer discs rotate for
max. 1-2 revolutions
; only
with right-hand rotary field the blades will cut. The left-hand rotary field damages
the hydraulic pump!
5.3. How to set the heating element temperature
Display = Display of the actual value
Push shortly button P (1), the display shows <SP>,
change desired value with buttons ▲ (3) ▼ (2).
Push shortly button P (1), the actual temperature is
displayed again (or automatic change after 30s).
During heating up to desired value, the control lamp K2 (4)
is on. As soon as the desired temperature is reached, the
control lamp K2 (4) is blinking.
