Ku nst sto ffschweißtec hni k
Description of the product
Chapter 1
30.07.12
Working Instructions WIDOS 10000 mobile
Page 8 of 52
1.5.1.1.
WIDOS
10000 mobile
General data
Pipe diameter range:
OD = 1000 mm (optional 500 mm up to 900 mm)
Material which can be welded:
PP, PE80, PE 100
Weight:
appr. ?? kg
Emission
- There will be noise exceeding 80 dB (A); it is obligatory to
wear ear protection!
- When using the named pipe materials and when welding
below 260°C / 500°F, no toxic damp arises
Ambient conditions in the
welding area:
-
Take care for cleanness (no dust at the welding area).
- If secured by an appropriate measurement that allowed
conditions for welding are indicated, it is possible to work
in any outside temperature condition as far as the welder
is not constrained in its manual skill.
-
Avoid humidity, if necessary use a welding tent.
-
Avoid strong sun ray influence.
-
Protect from wind, shut the pipe ends.
1.5.1.2.
Basic frame
Material frame:
Structural steel
Material clamping rings:
Steel
Feeding:
CEE 63 A
Power:
38 kW
Voltage:
400 V (+-10%)
Frequency:
50 Hz
Ø cylinder / Ø piston rod:
63 mm / 40 mm
Cylinder stroke length:
500 mm
Max. force (F = P x A):
93 kN at 250 bar,
(1 bar at pressure gauge = 372 N)
Movement speed:
5,5 cm/s
1.5.1.3.
Hydraulic pump
Power:
5,5 kW
Voltage:
400 V (+-10%)
Current:
11,3 A
Frequency:
50 Hz
Hydraulic oil tank:
appr. 40 L
Speed:
1450 rpm
Max. working pressure of pump:
appr. 250 bar
Working pressure:
0-250 bar adjustable
Volume flow rate:
12,21 L/min
