Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
30.07.12
Working Instructions WIDOS 10000 mobile
Page 12 of 52
2.7. Maintenance and inspection, repair
All maintenance and repair work have to be basically performed with the machine
in off position.
During this the machine has to be secured against unauthorized switching on.
Prescribed maintenance and inspection work should be performed in time.
The DVS gives the advice of inspection work after 1 year.
For machines with a especially high usage percentage the testing cycle should be
shortened.
The work should be performed at the WIDOS GmbH company or by an authorized
partner.
2.8. Dangers while handling the machine
The machine WIDOS
10000 mobile
is constructed according to the latest technical standard
and the acknowledged technical safety rules. However, dangers for the operator or other
persons standing nearby may occur. Also material damages are possible.
The machine may only be used
•
according to the purpose-oriented usage
•
in safety technical impeccable status.
Disturbances which may affect the safety of the machine must be cleared immediately.
2.9. Specific dangers
2.9.1. Danger of stumbling over electric wire
Make sure that no person has to step over the wire.
Lay the wire in such a way that the danger is kept at a minimum.
2.9.2. Dangers caused by electric energy
Only skilled persons are allowed to work at electrical appliances!
•
The electrical equipment of the machine has to be checked regularly. Loose
connections and damaged cables have to be replaced immediately.
•
If work at alive parts are necessary, a second person has to assist who can disconnect the
machine from the mains if necessary.
•
All electric tools (heating element, planer and aggregate) have to be protected from rain and
dropping water (if need be use a welding tent).
•
According to VDE 0100, the use on construction sites is only allowed with a power distributor
with a FI-safety switch.
