Ku nst sto ffschweißtec hni k
Operating and indicating elements
Chapter 4
30.07.12
Working Instructions WIDOS 10000 mobile
Page 19 of 52
4.4. Switch cabinet
No.
Denomination / Function
28
Heat sink
29
Control lamp <Oil temperature>, at 80°C the lamp illuminates and indicates that the
pump is switched off
30
Temperature regulator, to set the required temperature
31
Main switch, to switch on / off the machine
32
Lock for switch cabinet.
Attention!
Hand over the key to authorized personnel only.
F2
Circuit breaker K8A, control fuse
F10
Motor protective 9-12A, hydraulic pump
F20
Circuit breaker, 3 x B40A; heating element
F40
Motor protective 9-12A, planer
Q10
Soft starter hydraulic pump
Q40
Contactor planer
T2
24V – switch supply unit
4.4.1. Control lamp oil temperature
The oil temperature is supervised in order that the hydraulic may not get damaged.
As soon as the oil temperature reaches ≥ 80°C, the pump switches off and the signal lamp
illuminates in red.
If the oil temperature has fallen to appr. 70°C, the pump switches on again automatically and the
signal lamp extinguishes.
28
29
30
31
F20 / F2 / F10 / F40 / Q40
32
Q10 / T2
