WIA CP149-1, Руководство оператора

Страница: 23 / 28

23 22
To replace liner: Disconnect gun/cable
assembly at the Euro adaptor. Remove
nozzle (1) gas diffuser (3) and insulator (4).
Withdraw old liner from the wirefeeder
end. Insert new liner and refit gun/cable
assembly to the wirefeeder.
At the gun end, compress the liner within
the gun cable, then cut it approx 20mm
past the end of the body tube/neck (5).
Refit insulator and screw gas diffuser on
firmly with a wrench.
Insert tip (2) into gas diffuser then thread
nozzle onto gas diffuser/tip and tighten
firmly by hand.
Part # Description
BEN-3400C Nozzle, copper, 3/4” I.D,
flush
BEN-3414B Nozzle, brass, 1/4” I.D,
recess
BEN-3414C Nozzle, copper, 3/4” I.D,
1/4”, recess
BEN-3418B Nozzle, brass 3/4” I.D,
1/8”, recess
BEN-5800C
Nozzle, copper, 5/8” I.D,
flush
BEN-5814B Nozzle, brass, 5/8” I.D,
1/4” recess
BEN-5814C Nozzle, copper, 5/8” I.D,
1/4” recess
BEN-5818B
Nozzle, brass, 5/8” I.D,
1/8” recess
BEN-5818C Nozzle, copper, 5/8” I.D,
1/8” recess
Wire diameter Part #
0.8mm
BET-030
0.9mm BEST-035
1.0mm BET-039
1.2mm BET-045
1.4mm BET-052
1.6mm BET-062
2.0mm BET-078
Nozzles
Tips
Cut Here
Compress Liner
Fig 10 Replacing the Gun Cable Liner
20mm