Weldmatic Fabricator | Operator Manual | Model No CP149-2
19
18
11 SERVICE INFORMATION
Before removing the equipment
cover, ENSURE that the equipment
is disconnected from the mains
power supply. When the equipment
is energised LETHAL VOLTAGES
are present on the electrical
components enclosed.
The following information is
intended for use by qualified
service personnel. The unit is
energised, LETHAL VOLTAGES
are present on the electrical and
electronic components. It is not
intended that persons without
suitable training and knowledge
attempt to perform service tasks
on the components of this welder.
If the welding machine requires
service or repair, take the machine
to an authorised service agent.
Australian service agents can be
located on the welding.com.au
website. Alternatively call customer
service; Australian 1300 300 884
New Zealand 0800 9353 9355.
When contacting a service
agent please have an accurate
description of the fault, and the
machine serial number located on
the base of the machine.
C1492A.............
