9
8
Fig 1 Power Source Controls
1 On/Off Control
This switch provides mains power ON/OFF
control.
2 Fine Voltage Control
This switch provides Fine adjustment of the
output welding voltage over ten steps.
3 Coarse Voltage Control
This switch provides Coarse adjustment
of the output welding voltage over three
ranges.
4 Positive Welding Output Terminal
5 Negative Welding Output Terminal
6 Gas Outlet
Connector for shielding gas hose from
remote wirefeeder.
4 POWER SOURCE CONTROLS
7 Wirefeeder Control Socket
Connector for control cable from remote
wirefeeder.
8 Ammeter
This meter displays actual welding current
during welding operation, and a stored
reading for 30 seconds after welding.
9 Circuit Breaker
This circuit breaker protects the 32 Vac
wirefeeder supply circuit.
10 Voltmeter
This meter displays actual welding voltage
during welding operation, and a stored
reading for 30 seconds after welding.
9
8
10
2
1
3
5
4
6
7
