Whirlpool RY160LXTQ, Руководство пользователя

Страница: 57 / 62

6-5
Hidden Functions
s tl u s e R e r u d e c o r P t s e T e r u t a e F l o r t n o C
M1 Oven temperature
adjustment
Press
BAKE pad.
Enter
550 on the digit pad.
Immediately press and hold
BAKE pad for
3 to 5 seconds.
Oven can be adjusted from -35 to +35
degrees in 5-degree increments by
pressing MORE+ or LESS- pads. To
avoid over adjusting the oven, move
temperature 5 degrees and wait 4
seconds for the data entry timer to expire
to accept the change. Temperature
adjustment will be retai ned even through a
power failure
.
Increasing or decreasing oven
temperature does not affect self-
cleaning temperature.
M1 Temperature display Press and hold CANCEL and BAKE pads
for 3 to 5 seconds. Press
MORE+ or
LESS- pads to change.
Toggles temperature reading (°F or °C)
on the display.
M1
Clock display Press and hold
CANCEL and CLOCK
pads for 3 to 5 seconds.
Toggles clock on or o ff.
M1
24-hour clock Press and hold
CANCEL and DELAY
pads for 3 to 5 seconds. Press MORE+ or
LESS- pads to change.
Toggles time setting to 12-hour or 24-
hour display.
M1 Factory default Press and hold CANCEL and KEEP
WARM pads for 3 to 5 seconds.
Resets clock to factory settings.
M1 12-hour shutoff Control automatically cancels cooking
operation and removes all relay drives 12
hours after the last pad touch.
See, "Sabbath Mode" to disable.
M1
Sabbath mode Hold
CLOCK pad for 3 to 5 seconds to
activate Sabbath mode.
Hold
CLOCK pad for 3 to 5 seconds to
disable Sabbath mode.
Desired bake function must be initiated
before entering Sabbath mode.
"SAb" flashes for 5 seconds, then
remains on until timed-out or cancelled.
Status SAb is not fault code 5Ab. All
pad inputs are disabled except
CANCEL
and
CLOCK
pads. This mode
disables the 12-hour shutoff and allows
bake mode operation for 72 hours. The
oven light is not disabled.
M1
Child lockout Press and hold
CANCEL and COOK &
HOLD pads for 3 to 5 seconds until beep
sounds. To reactivate the control, press
and hold CANCEL and COOK & HOLD
pads for 3 to 5 seconds.
This safety feature prevents children
from accidentally programming the oven
(electronic oven control is disabled).
Child lockout features must be reset
after a power failure.
M1 Diagnostic code display Press and hold MORE+ pad within 30
seconds of powering up the unit.
Cycle through the codes using the
MORE+ or LESS- pads.
The last 5 diagnostic codes are stored
in the non-volatile memory.
See
"
Description of Error Codes
"
for
explanation.