Whirlpool RY160LXTQ, Руководство пользователя

Страница: 22 / 62

2-14
A. 10–32 hex nut
B. Line 1 (black)
C. Bare (green) ground wire
D. Ground-link screw
E. Neutral (white) wire
F. Line 2 (red)
G. Terminal lug
B
A
G
E
C
D
F
7. Connect line 1 (black) and line 2 (red) wires
to the outer terminal block posts with 10-32
hex nuts.
8. Securely tighten hex nuts.
9. Replace terminal block access cover.
Bare Wire Torque Specifications
Attaching terminal lugs to the terminal block -
20 lbs-in. (2.3 N-m)
e u q r o T g w A e ri W
8 gauge copper 25 lbs-in. (2.8 N-m)
6 gauge aluminum 35 lbs-in. (4.0 N-m)
5. Use Phillips screwdriver to connect the bare
(green) ground wire to the range with the
ground-link screw. The ground wire must
be attached first and must not contact any
other terminal.
6. Use 3/8" nut driver to connect the neutral
(white) wire to the center terminal block
post with one of the 10–32 hex nuts.
3-wire connection: Direct Wire
Use this method only if local codes permit
connecting ground conductor to neutral sup-
ply wire.
1. Pull the conduit through the hole and
conduit plate on bottom of range. Allow
enough slack to easily attach the wiring
to the terminal block.
A. Terminal block
B. Ground-link screw
C. Cord/conduit plate
D. Line 2 (red) wire
E. Bare (green) ground wire
F. Line 1 (black) wire
G. Strain Relief
A
B
C
D
E
F
D
G
2. Attach terminal lugs to line 1 (black), bare
(green) ground, and line 2 (red) wires.
Loosen (do not remove) the set screw
on the front of the terminal lug and insert
exposed wire end through bottom of ter-
minal lugs. Securely tighten set screw to
10 lbs-in. torque. See Bare Wire Torque
Specifications chart.