11
EN
INSTRUCTIONS FOR INSTALLATION AND ADJUSTMENT
The method of connection in force in the country in which the appliance is to be installed;
For type A appliances, the instructions shall state that these appliances are to be installed with sufficient venti
-
lation to prevent the occurrence of unacceptable concentrations of substances harmful to health in the room in
which they are installed;
The instructions include, where appropriate, an electrical wiring diagram of the appliance and reference to the
flue socket outlet.
The instructions also mention the need to install the appliance in a suitably ventilated room.
The instructions also state the flow of air required for combustion, mentioning the need to install the appliance
in a suitably ventilated room in accordance with the regulations in force.
(2 m
3
/h for each kW installed for combustion purposes, 34 m
3
/h for each kW installed for the welfare of the
users).
1.4 INFORMATIVE LABELS
On each oven there are applied some metal labels, that give important info concerning characteristics of the oven,
electric and plumbing connections and eventually the drain connection.
On the right hand side panel there is the label A.
The info contained on this label are:
• Name and address of the manufacturer
• Oven model
• IPX protection grade against water jet.
• Conformity to EC directives.
• Power input and power supply (single or three phase).
• Serial number of the oven
• Symbol of European Directive 2012/19/UE
Near the connector for water connection there is the label C.
Label C indicates water features necessary for a correct functioning of the
oven. Same features are listed at paragraph 2.4 of this manual.
Removing the right side panel, on the oven chassis you find label B.
On this label the serial number of the oven is repeated.
In this way, the customer or the installer can find the serial number of the
oven also when the label A is dirty or damaged.
Close to the drain there is the label D, containing info concerning drain con-
nection.
