COMPONENT ACCESS
Whirlpool Compact Heat Pump Dryer
n
4-21
Removing the Back Panel (continued)
12. Use a T20 Torx driver to remove the two (2) screws
securing the access cover bracket to the back panel (as
illustrated in Figure 4). Remove cover bracket and set aside.
Figure 4
13. Remove the plastic access cover and set aside (see Figure
5).
Access
Cover
Figure 5
14. Use a T20 Torx driver to remove the ten (10) screws
securing heat channel cover to the back panel (as
illustrated in Figure 6). Remove the heat channel and set
aside.
Figure 6
15. Use a T20 Torx driver to remove the three (3) screws
securing the rear panel to the base assembly (as
illustrated in Figure 7). Remove rear panel from base
assembly.
Figure 7
16. Reverse procedure to reinstall the rear panel assembly.