Whirlpool 4.3 CU FT Скачать руководство пользователя страница 38

Страница: 38 / 68

3-14

Whirlpool Compact Heat Pump Dryer

COMPONENT TESTING

For Service Technician Use Only

TEST #6: Buttons and Indicators

This test is performed when any of the following situations

occurs during step

S01

of the Service Test Cycle (see page X).

None of the indicators or display turn on

Some buttons do not light

No beep sound is heard

None of the indicators or display turn on:

1. Unplug dryer or disconnect power.
2. Remove top panel, left side panel, and console to access

the ACU and user interface (UI).

3. Visually check that ACU connectors are inserted all the

way into the ACU.

4. Visually check that UI connector is inserted all the way

into the UI. Check for continuity in the UI harness. If there

is no continuity, replace the harness.

5. Visually check that the UI and housing assembly is

properly inserted into the front console.

6. If all visual checks pass, perform TEST #1: ACU Power

Check, page 12, to verify supply voltages.

If supply voltages are present, replace the user

interface and housing assembly.

If supply voltages are not present, replace the ACU.

7.  Reassemble all parts and panels.
8.  Plug in dryer or reconnect power.
9.  Perform step S01 of the Service Test Cycle on page 3 to

verify repair. If it does not pass the test, replace the UI.

Some buttons do not light:

1. Unplug dryer or disconnect power.
2. Remove top panel, left side panel, and console to access

the ACU and user interface (UI).

3. Visually check that the UI and housing assembly is

properly inserted into the front console.

4. If visual check passes, replace the UI and housing

assembly.

5.  Reassemble all parts and panels.
6.  Plug in dryer or reconnect power.
7.  Perform step

S01

of the Service Test Cycle on page 3 to

verify repair. If it does not pass the test, replace the UI.

No beep sound is heard:

1. Unplug dryer or disconnect power.
2. Remove top panel, left side panel, and console to access

the ACU and user interface (UI).

3. Visually check that ACU connectors are inserted all the

way into the ACU.

4. Visually check that UI connector is inserted all the way

into the UI.

5. If all visual checks pass, replace the UI and housing

assembly.

6.  Reassemble all parts and panels.
7.  Plug in dryer or reconnect power.
8.  Perform step

S01

of the Service Test Cycle on page 3 to

verify repair. If it does not pass the test, replace the UI.

WARNING

Electrical Shock Hazard

Disconnect power before servicing.

Failure to do so can result in death or
electrical shock.

Replace all parts and panels before operating.

3$
*(

FOR SER

VICE TECHNICIAN’S USE ONL

DO NOT REMOVE OR DESTRO

CONTROL PANEL (buttons to use when entering Service Diagnostic Mode/Service Test Cycle)

Figure 1 - User Interface.

Options

Delay

Start

Timed

Dry

Dryness

Level

Program

3 Sec

Cycle

Signal

Control

Lock

Hold 3 Sec

Steam

X-Dry

Dry

Damp

Dry

Mixed

Heavy Duty

Normal

Synthetics

Delicates

Wool

Air Dry

Refresh

Timed Dry

Bulky/Bedding

Cycle selector knob

POWER button: press and hold until display turns on.

START/PAUSE button:

press and hold to run

Service Test Cycle and

advance through steps

in Service Test Cycle.

DELAY START and OPTIONS buttons: press DELAY START

and OPTIONS buttons together to enter Service Diagnostic

Mode/Service Test Cycle.

POWER button: press and

hold until display turns on.

DELAY WASH and OPTIONS buttons:

press DELAY START and OPTIONS

buttons together to enter Service

Diagnostic Mode/Service Test Cycle.

START/PAUSE button: press

and hold to run Service Test

Cycle and advance through

steps in Service Test Cycle.

Control Knob

Figure 1- Service Diagnostic Mode/Test Cycle

Содержание 4.3 CU FT





































































Результаты поиска

Содержание 4.3 CU FT

Отзывы:

Похожие инструкции для 4.3 CU FT

Бренды по названию

Популярные бренды

Whirlpool 4.3 CU FT, Руководство по обслуживанию

Результаты поиска

Содержание 4.3 CU FT

Отзывы:

Похожие инструкции для 4.3 CU FT

Бренды по названию

Популярные бренды