WHILL F страница 44 Скачать руководство пользователя

Страница: 44 / 120

WHILL Model F User Manual

3. Assembly and adjustment

3.2.5.

Adjusting the height of the arm rest

CAUTION

When moving the arm up or down, be careful that y

our finge

rs do not become caught.

There is a risk of injury.

This following procedure introduces an example where the controller is installed on the right arm.

Change and adjust the locking position of the arm rest
to the desired height.

Set the position so that the scale on the arm rest is
aligned with the upper end of the arm.

The height of the arm rest can be adjusted in 3
stages.

Tighten the arm rest adjustment screw

, and fix the arm

rest in place.

• After adjustment is completed, try to slide the

arm rest up and down to confirm that it is locked
in place and does not slide.

• If rattling of the arm rest bothers you, further

tighten the arm rest adjustment screw with a
Phillips screwdriver.

Arm rest adjustment screw

Adjust the height of the arm rest on the opposite side
in the same way.

Содержание F

























































































































Результаты поиска

Содержание F

Отзывы:

Похожие инструкции для F

Бренды по названию

Популярные бренды

WHILL F, Руководство пользователя

Результаты поиска

Содержание F

Отзывы:

Похожие инструкции для F

Бренды по названию

Популярные бренды