WHILL F Скачать руководство пользователя страница 69

Страница: 69 / 120

WHILL Model F User Manual

Operating procedures

This section explains the procedures for getting in and operating the device.

WARNING

Do not sit on the controller, place the controller on the ground with the device folded, or apply

an excessive load to the controller. Do not press the controller or switches with excessive force
or operate them with a sharp object.

There is a risk that the controller may be damaged, rendering the device inoperable.

CAUTION

If the device is not used for a long period, ensure the battery is fully charged before storing.

Charge the battery at least once a month.

There is a risk that the battery may get excessively depleted and cannot be charged.

• This device is an electrical product. The waterproof performance of this device conforms to IPX4 (resistance

against water splashes from any direction). To prevent a potential malfunction, please avoid extended use in
rainy weather and driving through puddles.

• When using the device for the first time, it is recommended that you use it in an environment with someone

around you.

Содержание F

























































































































Результаты поиска

Содержание F

Отзывы:

WHILL F, Руководство пользователя, Страница: 69 / 120

Результаты поиска

Содержание F

Отзывы: