WHILL F Скачать руководство пользователя страница 64 | Manualshive

Страница: 64 / 120

WHILL F Скачать руководство пользователя страница 64

63

WHILL Model F User Manual

4

4. Charging the battery

5.

Remove the cap of the battery charging port and
connect the DC connector to the battery charging port.

Connect the DC connector so that the terminal inside is
aligned with the hole of the charging port.
The charger indicator begins flashing green, and
charging starts.

• If the charger indicator flashes red, the charger is

not properly connected. In this case, disconnect
and reconnect again.

• If the charger indicator flashes red even though

you attempt to establish a connection several
times, a battery or charger malfunction may have
occurred.

• If the charger indicator turns green right away

even though the battery is not charged fully, a
battery other than the battery provided with the
device may have been used. Be sure that the
charger indicator flashes green.

Cap

DC connector

6.

Charging is completed when the charger indicator
turns solid green.

7.

Disconnect the DC connector from the battery, then
disconnect the plug from the wall outlet.

8.

Close the cap of the battery charging port.

«
...
62
63
64
65
66
...
»

Содержание F

























































































































Отзывы:

Нет отзывов