WHILL F страница 70 Скачать руководство пользователя | Manualshive

Страница: 70 / 120

background image

69

WHILL Model F User Manual

5

5. Operating procedures

5.1. Inspection before getting in the device

WARNING

Inspect the following before getting in the device.

If you get in the device with some problem still present, there is a risk of injury or accident. If
components need to be replaced or repaired, stop using the device immediately and contact your
dealer or technical support.

Inspection items

1. Inspection with the power off

Assembly

• Check that all parts are correctly assembled and that there are no missing, broken, damaged, or loose

parts.

Function

• Check that the joystick moves smoothly.
• Check that the brakes can be released and the device can be pushed manually. Also, check that when the

brakes are locked, the device does not move when pushed.

• Check that the device has been properly unlocked (the lock indicator on the inside of the right arm shows

red).

Wheels

•  Check the treads and ensure they are not worn down by more than 1/64 inches (0.5 mm).
•  Check that there is no visible deformation or cracking of the front or rear wheels.
•  Check the rear wheels to see that they are at the appropriate air pressure [specified air pressure: 40 PSI].

(Tires are not crushed when pressed in by fingers.)

Seat assembly

• Check the seat to see that it is not ripped or sagging excessively.

2. Inspection with the power on

•  Check the battery charge level on the display and the charge level is sufficient.
•  Check that the switches on the controller are functional.
•  Check that the entire display is functional.
•  Check that the horn button is functional.
•  Check that the wheels are not making unusual noises when they spin.

If you encounter any of the problems listed above, which you are unable to resolve, contact your dealer or
customer support.

«
...
68
69
70
71
72
...
»

Содержание F

























































































































Отзывы:

Нет отзывов

Похожие инструкции для F

Бренд: EasyFold Страницы: 24

Бренд: E-Wheels Страницы: 12

Бренд: bp Страницы: 31

Бренд: Medicare Technology Страницы: 19

Бренд: Decathlon Страницы: 183

Бренд: JDY Imports Страницы: 26

Бренд: Karma Страницы: 68

Бренд: Zippie Страницы: 172

Бренд: Aresline Страницы: 16

Бренд: Van Os Страницы: 26

Бренд: Vermeiren Страницы: 36

Бренд: Vitea Care Страницы: 19

Бренд: Solax Страницы: 20

Бренд: Solax Страницы: 20

Бренд: Solax Страницы: 24

Бренд: PRO ACTIV Страницы: 48

4you EVOSPEEDY 4teen

Бренд: PRO ACTIV Страницы: 76

apollo outdoor mk.II

Бренд: Invacare Страницы: 22

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды