manualshive.com logo in svg

Wheatstone Corporation E1, Техническое руководство, Страница: 83 / 92

Поделиться
Скачать
Wheatstone Corporation E1 Скачать руководство пользователя страница 83

page  A – 3

E-1 / Apr 2011

A P P E N D I C E S

Options Text File

Introduction

There  are  a  number  of  operational  features  on  the  E-1  surface  that  are

controlled by the contents of the Options Text File (E1_OPTS.TXT) that resides
on the surface's flash drive. In order to configure these features it is necessary to
modify this file.

Modifying The Options Text File

There are several steps involved in modifying the file:

1. Establish an FTP (File Transfer Protocol) session with the surface. This  is

best  done  using  an  FTP  program  with  a  graphical  interface,  such  as
FileZilla  or  FTP  Surfer  by  Whisper  Technology.  You  will  set  up  an
anonymous session using the following information:

Name:  something useful, assuming you will save the setup

Address:  use the IP address of the surface

User name:  knockknock

Password:  whosthere

2. When the FTP session connects you will see a list of files and folders that

are on the surface. One of those files is the Options Text file, named as
specified above. Drag this file over to your PC's desktop so you can save
a copy.

3.  Make  any  required  changes  to  the  copy  of  the  file  on  your  desktop,

according to the information in the following sections, then save the file and
drag its icon back to the FTP window to send the modified file back to the
surface.

4. Once the modified file is on the surface, wait a minute to be sure that the

file has actually been written to the surface's flash memory. Then close the
FTP session.

5. Reboot the surface for the changes to take effect.

6. If the surface has a backup CPU you should also save the same modified

file to the backup CPU, which needs to be accessed by a separate FTP
session using its IP address. You can wait to reboot the surface until you
have sent the modified file to both surfaces; in this way you need only
reboot the surface once.

Содержание E1





























































































Отзывы:

Нет отзывов