Wheatstone Corporation E1, Техническое руководство, Страница: 25 / 92

page 3 – 3
E-1 / Apr 2010
M A S T E R P A N E L
dow on the Input Tab, or press the SELECT knob on the Master
panel, and select the desired Source from the signal list.
• When no A/B button is lit, pressing the SELECT knob will
open a screen showing a full list of input sources and locations for
quick source selection on a fader, or for making other connections
within the system. This operation may be denied to a user in the
Access Authorization settings.
Sources can also be selected in the Navigator program.
The Crosspoint matrix is analagous to an electronic patch bay.
Audio sources (router inputs) are located along the X axis at the top,
audio destinations (router outputs) are vertically stacked along the Y
axis on the left side. Simply click at the intersection of the desired
Source and Destination signals to “patch” them. All surface mixes
(eg. PGM busses, Bus-Minus, etc.) appear as Sources. All surface
inputs (faders, talk back, monitor source selects, etc.) appear as
destinations. Surface signals may be routed just like any user I/O.
Source Visibility - use the Source Visibility Option setting to
limit the sources the user “sees” in the signal tree. This feature is
helpful, especially in large systems with lots of signals.
E-1 Mixer Outputs
E-1 Mixer Inputs
E-1 / Nov 2012