Wheatstone Corporation E1, Техническое руководство, Страница: 60 / 92

page 4 – 4
E-1 / Apr 2010
H A R D W A R E
Hook-Ups
All user wiring to and from the host controller is made via I/O connectors
located on the control surface rear.
There are two RJ-45 connectors: one is for Ethernet connection, and the other
is for the CAT5 Mixer Link connection (this port is not used if the E-1 is part of
a WheatNet-IP system).
There is also a female DB-9 connector for feeding line level signals to the
internal amplifiers that feed the headphone jack. The pinout drawing on page 4-6
shows all wiring connections at a glance.
“ETH” RJ-45—M
ain
E
THERnET
C
onnECToR
P
in
1 – TXD +
P
in
2 – TXD -
P
in
3 – RXD +
P
in
4 – n/C
P
in
5 – n/C
P
in
6 – RXD -
P
in
7 – Ln LED
P
in
8 – LK LED
“CaT5” RJ-45—M
ixER
L
ink
C
onnECToR
Pin 1 – TXD +
Pin 2 – TXD -
Pin 3 – RXD +
Pin 4 – N/C
Pin 5 – N/C
Pin 6 – RXD -
Pin 7 – N/C
Pin 8 – N/C
“HEaDPHonE” DB-9—H
EaDPHonE
C
onnECToR
Pin 4 – HDPN LT HI
Pin 5 – HDPN LT SH
Pin 9 – HDPN LT LO
Pin 7 – HDPN RT HI
Pin 8 – HDPN RT SH
Pin 3 – HDPN RT LO
Pin 1 – N/C
Pin 2 – N/C
Pin 6 – N/C
E-1 / May 2017