Wheatstone Corporation E1 Скачать руководство пользователя страница 20

Страница: 20 / 92

page 2 – 4

E-1 / Apr 2010

I N P U T P A N E L

Source Window

Click in the SOURCE window to open

the signal tree. Highlight a source name in

the tree and double-click to select it.

You may use the Visibility feature in

Navigator to limit the signal list the user

“sees” when selecting sources. This feature

is especially useful in large systems with lots

of sources.

Visibility for input sources can also be set from the surface. This

procedure is outlined in Chapter 3.

Fader Mode Controls and Indicators

There are four available channel modes:

Stereo, Mono, Left only, and Right only. Click

on the desired mode and its virtual switch will

light.

STEREO - selects stereo mode; Left in feeds

fader L, right in feeds fader R. If a mono source

is selected, it will feed both L and R.

MONO - selects mono mode. If a stereo

source is selected it is summed to mono and

reduced by 6dB.

LEFT (left only) - passes only the left chan-

nel of a stereo source to both L and R.

RIGHT (right only) - passes only the right

channel of a stereo source to both L and R.

Pan

L/R - slider moves the signal left to right.

Save

The user can save all adjustments with the SAVE button.

Pressing the SAVE button will bring up the “SAVE TO” form

that allows all changes to be saved to a channel, a source,

an event, or a preset.

E-1 / Nov 2012

Содержание E1





























































































Результаты поиска

Содержание E1

Отзывы:

Wheatstone Corporation E1, Техническое руководство, Страница: 20 / 92

Результаты поиска

Содержание E1

Отзывы: